Driveway Pavers Midrand

How Do I Make My Asphalt Look Better Driveway Pavers?

Your asphalt pavement is important to you. It was a significant investment intended to increase property value, safety, and curb appeal. So it is no surprise that you are interested in learning ways to enhance the appearance so that it looks the way it did the day it was installed. Whether you have an asphalt drive way or parking lot, Driveway Pavers the options for making it look better remain fairly the same. Continue reading to learn how you can make your asphalt pavement look like new again.

Paving Specialists Quotes

Asphalt Overlays

If your paved surface is old and faded, an overlay is a great investment. As long as the existing pavement is in good structural condition, a new layer of asphalt can be poured directly over it, rendering a fresh, brand-new paved surface. Driveway Pavers  in Sunninghill   Not only are overlays efficient and cost-effective, they are long-lasting. If your paved surface is not structurally sound, you can get the same results by removing the old pavement and repaving the entire surface with new asphalt. These two options are the most invasive and significant investments, but they are worth the overall value you receive long-term.

Asphalt Companies Quotes

Do-It-Yourself Tips

If you are not interesting in a pavement renovation, you can still benefit by implementing some do-it-yourself strategies to keep your lot or drive looking great. First, routine debris removal is important. This involves picking up trash and litter on a daily basis. It also involves prompt leaf and snow removal every season. Not only does this prevent unsightly stains, corrosion, and hazards, it makes the lot look clean and fresh. If you have a large lot or complex, it is wise to invest in a street sweeping machine to make this chore more efficient.

Paver Repair Quotes

Preventative Maintenance and Repairs

Whether you choose to overlay your existing pavement, remove and repave your asphalt, or implement DIY strategies, preventative maintenance and fixing minor damages is a must. Catching small problems early on can save you money and maintain strong pavement. This includes crack filling, pothole repair, line striping and painting, grade repairs, drainage adjustments, and more. You must always be maintaining your paved surfaces, regardless of condition or square footage.

Asphalt Installation Costs

Sealcoating

Every paved asphalt surface should have a protective coating. Asphalt needs to be seal coated every 3 to 5 years, especially in regions that are hot and dry most of the year. This thin, clear protective layer shields harmful sunrays, which prevents it from prematurely fading, cracking, and more. It also creates a waterproof barrier that prevents corrosion, crumbling, heaving, and more.

Interesting Facts About Driveway Pavers in Rivonia:

About Driveway Pavers in Rivonia:

Paving Companies Near Me

Although most people do not have the tools or equipment to actually install an asphalt driveway there are many things you can do to prepare the drive for paving work. The driveway without exception must have a solid base underneath to pave upon. Soft or wet spots are the most common reason for failure of the pavement itself. Cracking or alligatoring means the ground is unable to carry the weight of the vehicles driven over it. Severe wet spots will cause the pavement to fail totally and breakup into large chunks and cause the entire driveway to fail.

There are available today ground stabilization fabric materials that can be laid under stone sub base materials in wet areas to help solidify the sub base itself. The material is fairly expensive but may allow installation of a driveway where it would not be possible other wise. If placed directly on the earth below the sub base and over the wet area, once the sub base material is properly compacted the ground will support a great deal more weight without and shifting or movement. Many masonry supply stores carry these materials. It will take two people to roll out and handle the fabric as it generally comes in twelve foot wide rolls. A local excavating contractor may have some smaller rolls to sell. Give them a try as well.

Our first job is assure there are no wet spots either by installing some under drains, ditching along the edges to carry away surface water or actually replacing some of the wet earth with stone or other suitable materials. Sub base materials could be small and large stones, DOT item 4 materials, crushed gravel or bank run sand and gravel perhaps. The material needs to drain well and can be compacted with mechanical compactors. Drainage piping could be twelve inch corrugated piping which when installed will help water quickly pass under a drive or smaller four inch perforated piping run under the driveway areas encased in stone to provide constant pathways for water drainage without soaking the soils themselves. Water will always take the path of least resistance so any drainage piping installed will help the ground to dry much more quickly than nature would allow by itself.

Once you have solved any current or potential water problems you can move on to the actual asphalt sub base itself. Most homeowner driveways have a four inch base of gravel shale or item 4 installed when the home was built. Over the passing years, car tires break the shale down into very small pieces which will not provide a great sub base material. Adding new shale or stone can become a yearly maintenance project to maintain a smooth driving surface. As the stone or shale is pressed into the earth you are creating a thicker and thicker sub base. Depending upon whether you want your new drive to finish up higher or perhaps level than the adjoining lawns or gardens is how much sub base you want to have in the end. A typical residential driveway is ten feet wide with an actual driving surface area of about eight feet wide. For paving, you will need a solid ten foot surface to get a nine foot drive. Ten foot drive, eleven foot surface and so on. You need to have at least six inches of sub base beyond the actual finished paved width on both sides. The extra flat area is used to backup the asphalt and prevent the edges from crumbling. Remember also that asphalt and sub base may be as much as six inches thick and will require extra topsoil to backup the edge of the sub base and asphalt.

By adding sub base material and keeping the surface as level as possible, you will already have the sub base built for the paving man. In many areas of the US a material called blue stone screenings is available. This material is actually finely crushed granite and comes in three colors. Blue which will turn a darker blue when wet as time passes. Red that will also turn a lighter blue over time and yellow which stays yellow tinted forever. Once graded, this material becomes as hard as concrete on a driveway. I have seen blue stone screening surfaces snow plowed winter after winter without any plowing damage. A new dusting every few years maintains the crisp color and in-fills any depressions that may have developed. This makes a super sub-base for finished asphalt.

Well ahead of the time to have the driveway paved you should also install several conduits under the driveway for future landscape lighting. Depending upon the length of the drive, a crossing conduit every fifty feet or so should suffice. If an area is very rocky or wet, add additional conduits now before paving. Adding them later will require cutting and patching the asphalt and will not only destroy the driveways appearance but will provide a potential area for surface water infiltration. Conduit is cheap and if you never use it, it is better safe than sorry. Plastic (PVC) conduit is better than metal as it will last underground forever. Put caps on both ends to avoid any nasty surprises later on when you uncover them. Clearly mark the ends with stakes but also draw a little map and take measurements to each end from permanent objects in the yard. Once the grass grows back you will have no idea where the conduit ends are located. If you do this far ahead of the actual paving, your car traffic will compact the sub-base and will prevent any future sinking under the asphalt and thereby causing the asphalt to crack. You do not want to have to cross the new asphalt with anything later on..

Call several paving contractors for prices. The nicest guy may not do the nicest job. Make sure you tell each one exactly the same things you want. If you change the description of the work, you will not get comparable prices. Write down what you want done and then give them a copy. Ask for a written quote to make sure they included everything on your lists. Will they pickup all spillage? Are they insured against yard damages to flowers or trees or your house? How long is driveway guaranteed? How thick with the rolled asphalt be when done? Loose rolled asphalt 3 inches thick will be only 1 1/2 to 2 inches thick when rolled. Ask questions before they do the work. Get a written signed contract and a copy of their insurance policy. Be very careful with down payments. If they insist on one, make sure it is not a major portion of the contract value. Many times a down payment is paid and the contractor never shows again. Do not be suckered in by sob stories. Reputable contractors have open accounts at asphalt plants and do not need your money to buy the asphalt. If you sense something is awry move on to someone else. Ask neighbors about his work or stop at someone's house who he has just paved their driveway. Most people are proud of their new yard and will glad to talk to you. Call the Better Business Bureau and check on the contractor as well. It may sound like you are a bit over cautious but after all it is your hard earned money.

Once you have selected a contractor ask him/her if there is anything else you can do to save a few bucks on the price. Maybe removing a pre-installed asphalt driveway apron or removing adjacent features such as signs or statues or whatever else that he figured on doing for you. If you save fifty bucks on the price, that is fifty dollars towards your next project.

Pete
Your Friendly Building Inspector

http://www.Wagsys.com

BICES-Building Inspection & Code Enforcement System Software

Driveway Pavers in Rivonia

Driveway Pavers Quotes

When the time comes to pave your driveway, you need not be overwhelmed with the task ahead. It is true that it is possible to repave your own driveway, although this can be a daunting task, especially depending on the size of your driveway! You will also need a lot of skill to do it properly, and it is usually just far less of a hassle to hire a paving contractor.

There are many contractors out there who would love to help you with your paving needs. One search on the internet can help you find paving contractors in your area. Furthermore, you will usually be able to narrow your search down to the exact area that you live in. If you look for your paving contractor on the internet, chances are good that besides contact details on directories some will have websites. These websites can be very useful, as you will be able to see what sort of paving you can get for your driveway. Most websites belonging to paving contractors will have online brochures which show you the types of materials you can choose for your driveway, as well as the different styles, colours and designs. If you do not have the internet you can also find paving contractors in your city in your local directory book.

It is not only your driveway that may need paving. Some people prefer to pave their entire garden, and other areas of their home. Courtyards are very popularly paved, as are steps leading up to homes. It can look very attractive to have a paved garden path in between green grass. Depending on your desired effect, you can have a different style of paving for your driveway that you have for your back garden. There are many different patterns and styles of putting the paving in which create beautiful effects. It is entirely up to you. There are many different types of paving you can choose from, with regards to the materials that you use. Some of the most popular choices are concrete, brick, flagstone and tiles.

Before you hire your new paving contractor, you need to check their previous experience. It is always a good idea to take on the services of a paving contractor who can show you a portfolio of their previous work. If they are able to give you contactable references too, then that is always an added bonus.

It is very important that you sign a proper contract before work begins on your paving. You do not want to be lumped with unexpected bills after your area has been paved, nor do you want your contractor disappearing halfway through the process. A contract will also give you reassurance regarding the time frame, in which the work is expected to completed, and also the materials and tools being used.

To conclude, it is easy to see why it is important to hire a good contractor for your paving needs. There are many good paving contractors available out there with years of experience.

Asphalt - To Seal or Not to Seal, That Is the Question

Paving Contractors Price

This contractor is employed by a company that makes surfaces that are paved like sidewalks, floors made of concrete, and roads. Some companies will even work on bigger projects like an airport runway. They will be hired by municipal agencies, homeowners, and business to repair existing paved surfaces or make new ones. Many of the companies that paving contractors work for will focus in either commercial or residential work but some will do both. It depends on the job and equipment needed.

Commercial paving contractors

They are the ones that will usually provide the pricing for the jobs needed in the outline of a bid. The one that is offered the job is typically the lowest bidder but not always. When working in commercial jobs, the contractor will report to the construction manager or general contractor instead of the owner. One of the jobs a paving contractor does is pour parking lots, walkways, and floors in new developments. If it is a municipal project they may repair any damage in an existing paying like cracks or potholes or lay new sidewalks, or roads,

Residential paving contractors

They will meet with the homeowner to discuss the project that is needed, figure out the approximate cost of materials and labor, and then give an estimate to the homeowner. The homeowner may hire them to put down a floor, patio, or walkway. They can also repair structures like walkways or stairs. Some of these paving companies may concentrate just on landscape paving. This can include laying stone items like outdoor tiles or pavers or installing a poured surface.

Machines used

Working as a paving contractor requires being able to use big pieces of equipment, which can include:

• Paving machine to smooth the freshly laid out road or parking lot surface
• Excavator to set up the land for paving
• Tamping machines, which are large machines that are used to help flatten out the gravel or dirt surfaces
• Dump truck to haul away any excess waste products and dirt and to haul in gravel or stones

Becoming a paving contractor

If you would like to have a career working in this field, you need to be one that does not mind working outdoors in any type of weather. You also need to feel at ease working on roads that are busy since this type of work is done in the daytime when traffic is passing nearby. You may also work as a flagger so you should have experience with road safety and flagging. Working as a paving contractor, you can expect to work in conditions that are busy, noisy, and dirty. If you work with hot asphalt, you need to be aware of the different heat levels and potential toxic fumes.

Paving Contractors Price

 


Driveway Pavers Midrand

Driveway Pavers Midrand