Sealcoating Contractor Brakpan

For other uses, see Asphalt (disambiguation). Note: The terms bitumen and asphalt are mostly interchangeable, Sealcoating Contractor in Brakpan except where asphalt is used as a shorthand for asphalt concrete. Natural bitumen from the Dead Sea Refined asphalt The University of Queensland pitch drop experiment, demonstrating the viscosity of asphalt

Asphalt Driveway Repair Quotes

Asphalt (/ˈæsˌfɔːlt, -ˌfɑːlt/), also known as bitumen (UK English: /ˈbɪtʃəmən, ˈbɪtjʊmən/,[1] US English: /bɪˈt(j)uːmən, baɪˈt(j)uːmən/)[2] is a sticky, black, and highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product, and is classed as a pitch. Before the 20th century, the term asphaltum was also used.

Asphalt Construction Quotes

The primary use (70%) of asphalt Best Driveway Pavers is in road construction, where it is used as the glue or binder mixed with aggregate particles to create asphalt concrete. Its other main uses are for bituminous waterproofing products, including production of roofing felt and for sealing flat roofs.

The terms “asphalt” and “bitumen” are often used interchangeably to mean both natural and manufactured forms of the substance. In American English, “asphalt” (or “asphalt cement”) is commonly used for a refined residue from the distillation process of selected crude oils. Outside the United States, the product is often called “bitumen”, and geologists worldwide often prefer the term for the naturally occurring variety. Common colloquial usage often refers to various forms of asphalt as “tar”, as in the name of the La Brea Tar Pits.

Lane

Asphalt Construction Quotes

Naturally occurring asphalt is sometimes specified by the term “crude bitumen”. Sealcoating Contractor Its viscosity is similar to that of cold molasses[6][7] while the material obtained from the fractional distillation of crude oil boiling at 525 °C (977 °F) is sometimes referred to as “refined bitumen”. The Canadian province of Alberta has most of the world’s reserves of natural asphalt in the Athabasca oil sands, which cover 142,000 square kilometres (55,000 sq mi), an area larger than England.

The Paving Company Near Me

The word “asphalt” is derived from the late Middle English, in turn from French asphalte, based on Late Latin asphalton, asphaltum, which is the latinisation of the Greek ἄσφαλτος (ásphaltos, ásphalton), a word meaning “asphalt/bitumen/pitch” which perhaps derives from ἀ-, “without” and σφάλλω (sfallō), “make fall”.  Asphalt Grinding Companies the first use of asphalt by the ancients was in the nature of a cement for securing or joining together various objects, and it thus seems likely that the name itself was expressive of this application. Specifically, Herodotus mentioned that bitumen was brought to Babylon to build its gigantic fortification wall.[11] From the Greek, the word passed into late Latin, and thence into French (asphalte) and English (“asphaltum” and “asphalt”). In French, the term asphalte is used for naturally occurring asphalt-soaked limestone deposits, and for specialised manufactured products with fewer voids or greater bitumen content than the “asphaltic concrete” used to pave roads.

Asphalt Driveway Costs

The expression “bitumen” originated in the Sanskrit words jatu, meaning “pitch”, and jatu-krit, meaning “pitch creating” or “pitch producing” (referring to coniferous or resinous trees). The Latin equivalent is claimed by some to be originally gwitu-men (pertaining to pitch), and by others, pixtumens (exuding or bubbling pitch), which was subsequently shortened to bitumen, thence passing via French into English. From the same root is derived the Anglo-Saxon word cwidu (mastix), the German word Kitt (cement or mastic) and the old Norse word kvada.

In British English, “bitumen” is used instead of “asphalt”. The word “asphalt” is instead used to refer to asphalt concrete, a mixture of construction aggregate and asphalt itself (also called “tarmac” in common parlance). Bitumen mixed with clay was usually called “asphaltum”,[13] but the term is less commonly used today.[citation needed]

Michigan left

Pave My Driveway Quotes

In Australian English, “bitumen” is often used as the generic term for road surfaces.

In American English, “asphalt” is equivalent to the British “bitumen”. However, “asphalt” is also commonly used as a shortened form of “asphalt concrete” (therefore equivalent to the British “asphalt” or “tarmac”).

The Paving Company Near Me

In Canadian English, the word “bitumen” is used to refer to the vast Canadian deposits of extremely heavy crude oil,[14] while “asphalt” is used for the oil refinery product. Diluted bitumen (diluted with naphtha to make it flow in pipelines) is known as “dilbit” in the Canadian petroleum industry, while bitumen “upgraded” to synthetic crude oil is known as “syncrude”, and syncrude blended with bitumen is called “synbit”.[15]

“Bitumen” is still the preferred geological term for naturally occurring deposits of the solid or semi-solid form of petroleum. “Bituminous rock” is a form of sandstone impregnated with bitumen. The tar sands of Alberta, Canada are a similar material.

Asphalt Driveway Paving Price

Neither of the terms “asphalt” or “bitumen” should be confused with tar or coal tars.[further explanation needed]

See also: Asphaltene

The components of asphalt include four main classes of compounds:

The naphthene aromatics and polar aromatics are typically the majority components. Most natural bitumens also contain organosulfur compounds, resulting in an overall sulfur content of up to 4%. Nickel and vanadium are found at <10 parts per million, as is typical of some petroleum.

The Paving Company Near Me

The substance is soluble in carbon disulfide. It is commonly modelled as a colloid, with asphaltenes as the dispersed phase and maltenes as the continuous phase.[16] “It is almost impossible to separate and identify all the different molecules of asphalt, because the number of molecules with different chemical structure is extremely large”.

Asphalt may be confused with coal tar, which is a visually similar black, thermoplastic material produced by the destructive distillation of coal. During the early and mid-20th century, when town gas was produced, coal tar was a readily available byproduct and extensively used as the binder for road aggregates. The addition of coal tar to macadam roads led to the word “tarmac”, which is now used in common parlance to refer to road-making materials. However, since the 1970s, when natural gas succeeded town gas, asphalt has completely overtaken the use of coal tar in these applications. Other examples of this confusion include the La Brea Tar Pits and the Canadian oil sands, both of which actually contain natural bitumen rather than tar. “Pitch” is another term sometimes informally used at times to refer to asphalt, as in Pitch Lake.

Asphalt Paving Cost Estimate

Bituminous outcrop of the Puy de la Poix, Clermont-Ferrand, France

The majority of asphalt used commercially is obtained from petroleum.[18] Nonetheless, large amounts of asphalt occur in concentrated form in nature. Naturally occurring deposits of bitumen are formed from the remains of ancient, microscopic algae (diatoms) and other once-living things. These remains were deposited in the mud on the bottom of the ocean or lake where the organisms lived. Under the heat (above 50 °C) and pressure of burial deep in the earth, the remains were transformed into materials such as bitumen, kerogen, or petroleum.

Natural deposits of bitumen include lakes such as the Pitch Lake in Trinidad and Tobago and Lake Bermudez in Venezuela. Natural seeps occur in the La Brea Tar Pits and in the Dead Sea.

Paving Companies Quotes

Bitumen also occurs in unconsolidated sandstones known as “oil sands” in Alberta, Canada, and the similar “tar sands” in Utah, US. The Canadian province of Alberta has most of the world’s reserves, in three huge deposits covering 142,000 square kilometres (55,000 sq mi), an area larger than England or New York state. These bituminous sands contain 166 billion barrels (26.4×10^9 m3) of commercially established oil reserves, giving Canada the third largest oil reserves in the world. Although historically it was used without refining to pave roads, nearly all of the output is now used as raw material for oil refineries in Canada and the United States.

Sealcoat

Asphalt Driveway Repair Quotes

The world’s largest deposit of natural bitumen, known as the Athabasca oil sands, is located in the McMurray Formation of Northern Alberta. This formation is from the early Cretaceous, and is composed of numerous lenses of oil-bearing sand with up to 20% oil.[19] Isotopic studies show the oil deposits to be about 110 million years old.[20] Two smaller but still very large formations occur in the Peace River oil sands and the Cold Lake oil sands, to the west and southeast of the Athabasca oil sands, respectively. Of the Alberta deposits, only parts of the Athabasca oil sands are shallow enough to be suitable for surface mining. The other 80% has to be produced by oil wells using enhanced oil recovery techniques like steam-assisted gravity drainage.

Driveway Paving Quotes

Much smaller heavy oil or bitumen deposits also occur in the Uinta Basin in Utah, US. The Tar Sand Triangle deposit, for example, is roughly 6% bitumen.

Bitumen may occur in hydrothermal veins. An example of this is within the Uinta Basin of Utah, in the US, where there is a swarm of laterally and vertically extensive veins composed of a solid hydrocarbon termed Gilsonite. These veins formed by the polymerization and solidification of hydrocarbons that were mobilized from the deeper oil shales of the Green River Formation during burial and diagenesis.

The Paving Company Costs

Bitumen is similar to the organic matter in carbonaceous meteorites.[23] However, detailed studies have shown these materials to be distinct.[24] The vast Alberta bitumen resources are considered to have started out as living material from marine plants and animals, mainly algae, that died millions of years ago when an ancient ocean covered Alberta. They were covered by mud, buried deeply over time, and gently cooked into oil by geothermal heat at a temperature of 50 to 150 °C (120 to 300 °F). Due to pressure from the rising of the Rocky Mountains in southwestern Alberta, 80 to 55 million years ago, the oil was driven northeast hundreds of kilometres and trapped into underground sand deposits left behind by ancient river beds and ocean beaches, thus forming the oil sands.

Paving Contractors Costs

The use of natural bitumen for waterproofing, and as an adhesive dates at least to the fifth millennium BC, with a crop storage basket discovered in Mehrgarh, of the Indus Valley Civilization, lined with it.[25] By the 3rd millennia BC refined rock asphalt was in use, in the region, and was used to waterproof the Great Bath, Mohenjo-daro.

In the ancient Middle East, the Sumerians used natural bitumen deposits for mortar between bricks and stones, to cement parts of carvings, such as eyes, into place, for ship caulking, and for waterproofing.[3] The Greek historian Herodotus said hot bitumen was used as mortar in the walls of Babylon.

The Paving Company Costs

The 1 kilometre (0.62 mi) long Euphrates Tunnel beneath the river Euphrates at Babylon in the time of Queen Semiramis (ca. 800 BC) was reportedly constructed of burnt bricks covered with bitumen as a waterproofing agent.

Bitumen was used by ancient Egyptians to embalm mummies.[3][28] The Persian word for asphalt is moom, which is related to the English word mummy. The Egyptians’ primary source of bitumen was the Dead Sea, which the Romans knew as Palus Asphaltites (Asphalt Lake).

Paving Companies Quotes

Approximately 40 AD, Dioscorides described the Dead Sea material as Judaicum bitumen, and noted other places in the region where it could be found.[29] The Sidon bitumen is thought to refer to material found at Hasbeya.[30] Pliny refers also to bitumen being found in Epirus. It was a valuable strategic resource, the object of the first known battle for a hydrocarbon deposit—between the Seleucids and the Nabateans in 312 BC.

Pave My Driveway Price

In the ancient Far East, natural bitumen was slowly boiled to get rid of the higher fractions, leaving a thermoplastic material of higher molecular weight that when layered on objects became quite hard upon cooling. This was used to cover objects that needed waterproofing,[3] such as scabbards and other items. Statuettes of household deities were also cast with this type of material in Japan, and probably also in China.

In North America, archaeological recovery has indicated bitumen was sometimes used to adhere stone projectile points to wooden shafts.[32] In Canada, aboriginal people used bitumen seeping out of the banks of the Athabasca and other rivers to waterproof birch bark canoes, and also heated it in smudge pots to ward off mosquitoes in the summer.

Asphalt Installation Cost Estimate

In 1553, Pierre Belon described in his work Observations that pissasphalto, a mixture of pitch and bitumen, was used in the Republic of Ragusa (now Dubrovnik, Croatia) for tarring of ships.

Toll road

Commercial Paving Cost Estimate

An 1838 edition of Mechanics Magazine cites an early use of asphalt in France. A pamphlet dated 1621, by “a certain Monsieur d’Eyrinys, states that he had discovered the existence (of asphaltum) in large quantities in the vicinity of Neufchatel”, and that he proposed to use it in a variety of ways – “principally in the construction of air-proof granaries, and in protecting, by means of the arches, the water-courses in the city of Paris from the intrusion of dirt and filth”, which at that time made the water unusable. “He expatiates also on the excellence of this material for forming level and durable terraces” in palaces, “the notion of forming such terraces in the streets not one likely to cross the brain of a Parisian of that generation”.

Driveway Pavers Near Me

But the substance was generally neglected in France until the revolution of 1830. In the 1830s there was a surge of interest, and asphalt became widely used “for pavements, flat roofs, and the lining of cisterns, and in England, some use of it had been made of it for similar purposes”. Its rise in Europe was “a sudden phenomenon”, after natural deposits were found “in France at Osbann (Bas-Rhin), the Parc (Ain) and the Puy-de-la-Poix (Puy-de-Dôme)”, although it could also be made artificially.[35] One of the earliest uses in France was the laying of about 24,000 square yards of Seyssel asphalt at the Place de la Concorde in 1835.

Among the earlier uses of bitumen in the United Kingdom was for etching. William Salmon’s Polygraphice (1673) provides a recipe for varnish used in etching, consisting of three ounces of virgin wax, two ounces of mastic, and one ounce of asphaltum.[37] By the fifth edition in 1685, he had included more asphaltum recipes from other sources.

Paver Repair Quotes

The first British patent for the use of asphalt was “Cassell’s patent asphalte or bitumen” in 1834.[35] Then on 25 November 1837, Richard Tappin Claridge patented the use of Seyssel asphalt (patent #7849), for use in asphalte pavement,[39][40] having seen it employed in France and Belgium when visiting with Frederick Walter Simms, who worked with him on the introduction of asphalt to Britain.[41][42] Dr T. Lamb Phipson writes that his father, Samuel Ryland Phipson, a friend of Claridge, was also “instrumental in introducing the asphalte pavement (in 1836)”.[43] Indeed, mastic pavements had been previously employed at Vauxhall by a competitor of Claridge, but without success.

Asphalt concrete

Residential Paving Companies Costs

Claridge obtained a patent in Scotland on 27 March 1838, and obtained a patent in Ireland on 23 April 1838. In 1851, extensions for the 1837 patent and for both 1838 patents were sought by the trustees of a company previously formed by Claridge. Claridge’s Patent Asphalte Company—formed in 1838 for the purpose of introducing to Britain “Asphalte in its natural state from the mine at Pyrimont Seysell in France”,—”laid one of the first asphalt pavements in Whitehall”.  Trials were made of the pavement in 1838 on the footway in Whitehall, the stable at Knightsbridge Barracks,”and subsequently on the space at the bottom of the steps leading from Waterloo Place to St. James Park”. “The formation in 1838 of Claridge’s Patent Asphalte Company (with a distinguished list of aristocratic patrons, and Marc and Isambard Brunel as, respectively, a trustee and consulting engineer), gave an enormous impetus to the development of a British asphalt industry”.[45] “By the end of 1838, at least two other companies, Robinson’s and the Bastenne company, were in production”,[50] with asphalt being laid as paving at Brighton, Herne Bay, Canterbury, Kensington, the Strand, and a large floor area in Bunhill-row, while meantime Claridge’s Whitehall paving “continue(d) in good order”.

Sealcoating Contractor in Brakpan ?

Pave My Driveway Price An alley in Fira, Santorini, Greece Sana'a, Yemen Howey Place, Melbourne, Australia Hagay Street, Old City, Jerusalem Rua Sobre-o-Douro, Porto, Portugal Peg Washington's Lane, Graiguenamanagh, County Kilkenny, Ireland

An alley or alleyway is a narrow lane, path, or passageway, often reserved for pedestrians, which usually runs between, behind, or within buildings in the older parts of towns and cities. It is also a rear access or service road (back lane), or a path or walk in a park or garden.[1]

A covered alley or passageway, often with shops, may be called an arcade. The origin of the word alley is late Middle English, from Old French: alee "walking or passage", from aler "go", from Latin: ambulare "to walk".[2]

The word alley is used in two main ways:

Grand Bazaar, Istanbul

In older cities and towns in Europe, alleys are often what is left of a medieval street network, or a right of way or ancient footpath. Similar paths also exist in some older North American towns and cities. In some older urban development in North America lanes at the rear of houses, to allow for deliveries and garbage collection, are called alleys. Alleys and ginnels were also the product of the 1875 Public Health Act in the United Kingdom, where usually alleys run along the back of streets of terraced houses, with ginnels connecting them to the street every fifth house.[citation needed] Alleys may be paved, or unpaved, and a blind alley is a cul-de-sac. Modern urban developments may also provide a service road to allow for waste collection, or rear access for fire engines and parking.

Because of geography, steps (stairs) are the predominant form of alley in hilly cities and towns. This includes Pittsburgh (see Steps of Pittsburgh), Cincinnati (see Steps of Cincinnati), Minneapolis, Seattle,[3] and San Francisco[4] in the United States, as well as Hong Kong,[5] Genoa and Rome.[6]

Some alleys are roofed because they are within buildings, such as the traboules of Lyon, or when they are a pedestrian passage through railway embankments in Britain. The latter follow the line of rights-of way that existed before the railway was built.

Arcades are another kind of covered passageway and the simplest kind are no more than alleys to which a glass roof was added later, like, for example, Howey Place, Melbourne, Australia (see also Block Place, Melbourne). However, most arcades differ from alleys in that they are architectural structures built with a commercial purpose and are a form of shopping mall. All the same alleys have for long been associated with various types of businesses, especially pubs and coffee houses. Bazaars and Souqs are an early form of arcade found in Asia and North Africa.

Some attractive historic alleys are found in older American and Canadian cities, like New York City, Philadelphia, Charleston, South Carolina, Boston, Annapolis, New Castle, Delaware, Quebec City, St John's, Newfoundland,[7] and Victoria, British Columbia.

View into Fan Tan Alley, Victoria, British Columbia, Canada

Québec City was originally built on the riverside bluff Cap Diamant in the 17th century, and throughout Quebec City there are strategically placed public stairways that link the bluff to the lower parts of the city.[8] The Upper City is the site of Old Québec’s most significant historical sites, including 17th- and 18th-century chapels, the Citadel and the city ramparts.

Fan Tan Alley is an alley in Victoria, British Columbia's Chinatown. It was originally a gambling district with restaurants, shops, and opium dens. Today it is a tourist destination with many small shops including a barber shop, art gallery, Chinese cafe and apartments. It may well be the narrowest street in Canada. At its narrowest point it is only 0.9 metres (35 in) wide.[9] Waddington Alley is another interesting alley in Victoria and the only street in that city still paved with wood blocks, an early pavement common in the downtown core. Other heritage features are buildings more than a century old lining the alley and a rare metal carriage curb that edges the sidewalk on the southern end.[10]

Looking south down Shubert Alley in Manhattan's Theater District

In the United States alleys exist in both older commercial and residential areas, for both service purposes and automobile access. In residential areas, particularly in those that were built before 1950, alleys provide rear access to property where a garage was located, or where waste could be collected by service vehicles. A benefit of this was the location of these activities to the rear, less public side of a dwelling. Such alleys are generally roughly paved, but some may be dirt. Beginning in the late 20th century, they were seldom included in plans for new housing developments.

When Annapolis, Maryland, was established as a city at the beginning of the 18th century,[11] the streets were established in circles. That encouraged the creation of shortcuts, which over time became paved alleys. Some ten of these survive, and the city has recently worked on making them more attractive.[12]

Several residential neighborhoods in Austin, Texas, have comprehensive alley systems. These include Hyde Park, Rosedale, and areas northwest of the Austin State Hospital.

In the Beacon Hill district of Boston, Massachusetts, Acorn Street, a narrow cobbled lane with row houses, is one of Boston's more attractive and historic alleys. Another early settled American city, New Castle, Delaware has a number of interesting alleys, some of which are footpaths and others narrow, sometimes cobbled, lanes open to traffic. Many of the alleys in the Back Bay and South End area are numbered (e.g. "Public Alley 438").

In the French Quarter of Charleston’s historic district, Philadelphia Alley (c. 1766), originally named "Cow Alley", is one of several picturesque alleys. In 1810 William Johnson gave it the name of "Philadelphia Alley", although locals call the "elegantly landscaped thoroughfare" "Dueler’s Alley".[13] Starting on East Bay Street, Stolls Alley is just seventeen bricks wide at its start, and named for Justinus Stoll, an 18th-century blacksmith.[14] For three hundred years, another of Charleston's narrow lanes, Lodge Alley, served a commercial purpose. Originally French Hugenot merchants built homes on it, along with warehouses to store supplies their ships. Just ten-foot-wide this alley was a useful means of access to Charleston’s waterways.[15] Today it leads to East Bay Street's many restaurants.

Main article: Steps of Cincinnati

Cincinnati is a city of hills.[16] Before the advent of the automobile a system of stairway alleys provided pedestrians important and convenient access to and from their hill top homes. At the height of their use in the 19th century, over 30 miles (48 km) of hill side steps once connected the neighborhoods of Cincinnati to each other.[17] The first steps were installed by residents of Mount Auburn in the 1830s in order to gain easier access to Findlay Market in Over-the-Rhine.[18] In recent years many steps have fallen into disrepair but there is a movement now to rehabilitate them.[19]

Broadway Alley is a rare alley in Manhattan; it is not located near Broadway, East Broadway or West Broadway

New York City's Manhattan is unusual in that it has very few alleys, since the Commissioner's Plan of 1811 did not include rear service alleys when it created Manhattan's grid. The exclusion of alleys has been criticized as a flaw in the plan, since services such as garbage pickup cannot be provided out of sight of the public, although other commentators feel that the lack of alleys is a benefit to the quality of life of the city.[20]

Two notable alleys in the Greenwich Village neighborhood in Manhattan are MacDougal Alley and Washington Mews.[21] The latter is a blind alley or cul-de-sac. Greenwich Village also has a number of private alleys that lead to back houses, which can only be accessed by residents, including Grove Court,[22] Patchin Place and Milligan Place, blind alleys. Patchin Place is notable for the writers who lived there.[23]

Shubert Alley is a 300-foot (91 m) long pedestrian alley at the heart of the Broadway theater district of New York City. The alley was originally created as a fire exit between the Shubert Theatre on West 45th Street and the Booth Theatre on West 44th Street, and the Astor Hotel to their east. Actors once gathered in the alley, hoping to attract the attention of the Shubert Brothers and get employment in their theatrical productions.[24] When the hotel was torn down, and replaced with One Astor Plaza (1515 Broadway), the apparent width of the alley increased, as the new building did not go all the way to the westernmost edge of the building lot. However, official, Shubert Alley consists only of the space between the two theatres and the lot line.

In the Brooklyn Heights neighborhood of Brooklyn, Grace Court Alley is another converted mews,[25] as is Dennett Place in the Carroll Gardens neighborhood.[26] The former is a cul-de-sac.

Pedestrians walking along Elfreth's Alley, Philadelphia

The Old City and Society Hill neighborhoods of Philadelphia, the oldest parts of the city, include a number of alleys, notably Elfreth's Alley, which is called "Our nation's oldest residential street", dating from 1702.[27] As of 2012[update], there were 32 houses on the street, which were built between 1728 and 1836.[28]

There are numerous cobblestoned residential passages in Philadelphia, many no wider than a truck, and typically flanked with brick houses. A typical house on these alleys or lanes is called a Philadelphia "Trinity", named because it has three rooms, one to each floor, alluding to the Christian Trinity.[29] These alleys include Willings Alley, between S. 3rd and S. 4th Streets and Walnut and Spruce Streets.[30] Other streets in Philadelphia which fit the general description of an alley, but are not named "alley", include Cuthbert Street, Filbert Street, Phillips Street,[31] South American Street,[32] Sansom Walk,[33] St. James Place,[34] and numerous others.

Steps, Pittsburgh's equivalent for an alley, have defined it for many visitors. Writing in 1937, war correspondent Ernie Pyle wrote of the steps of Pittsburgh:

And then the steps. Oh Lord, the steps! I was told they actually had a Department of Steps. That isn’t exactly true, although they do have an Inspector of Steps. But there are nearly 15 miles (24 km) of city-owned steps, going up mountainsides.[35]

The City of Pittsburgh maintains 712 sets of city-owned steps, some of which are shown as streets on maps.[36]

In hilly San Francisco, California alleys often take the form of steps and it has several hundred public stairways.[37] Among the most famous is the stairway known as the Filbert steps, a continuation of Filbert Street.[38] The Filbert Street Steps descend the east slope of Telegraph Hill along the line where Filbert Street would be if the hill was not so steep. The stairway is bordered by greenery, that consists both backyards, and a border garden tended to and paid for by the residents of the "street", and runs down to an eastern stub of Filbert Street and the walkway through the plaza to The Embarcadero. Many houses in this residential neighborhood are accessible only from the steps.

Also in San Francisco, Belden Place is a narrow pedestrian alley, bordered by restaurants, in the Financial District, referred to as San Francisco's French Quarter for its historic ties to early French immigrants, and its popular contemporary French restaurants and institutions.[39] The area was home to San Francisco's first French settlers. Approximately 3,000, sponsored by the French government, arrived near the end of the Gold Rush in 1851.[40]

Alley in Sausalito, California

Seattle is a city of hills, bluffs, and canyons and many stairs. There are over 600 publicly accessible Seattle stairways within the city limits.[41]

Ruelle verte (Green alley) Montréal, Québec, Canada.

Numerous cities in the United States and Canada, such as Chicago,[42] Seattle,[43] Los Angeles,[44] Phoenix, Washington, D.C.,[45] and Montréal, have started reclaiming their alleys from garbage and crime by greening the service lanes, or back ways, that run behind some houses.[45][46] Chicago, Illinois has about 1,900 miles (3,100 km) of alleyways.[42] In 2007, the Chicago Department of Transportation started converting conventional alleys which were paved with asphalt into so called Green Alleys. This program, called the Green Alley Program, is supposed to enable easier water runoff, as the alleyways in Chicago are not connected directly to the sewer system. With this program, the water will be able to seep through semi-permeable concrete or asphalt in which a colony of fungi and bacteria will establish itself. The bacteria will help breakup oils before the water is absorbed into the ground. The lighter color of the pavement will also reflect more light, making the area next to the alley cooler.[47] The greening of such alleys or laneways can also involve the planting of native plants to further absorb rain water and moderate temperature.

New life has also come to other alleys within downtown commercial districts of various cities throughout the world with the opening of businesses, such as coffee houses, shops, restaurants and bars.

Another way that alleys and laneways are being revitalized is through laneway housing. A laneway house is a form of housing that has been proposed on the west coast of Canada, especially in the Metro Vancouver area. These homes are typically built into pre-existing lots, usually in the backyard and opening onto the back lane. This form of housing already exists in Vancouver, and revised regulations now encourage new developments as part of a plan to increase urban density in pre-existing neighbourhoods while retaining a single-family feel to the area.[48] Vancouver's average laneway house is one and a half stories, with one or two bedrooms. Typical regulations require that the laneway home is built on the back half of a traditional lot in the space normally reserved for a garage.[49][50]

Toronto also has a tradition of laneway housing and changed regulations to encourage new development.[51] However this was discontinued in 2006 after staff reviewed the impact on services and safety.[52]

London has numerous historical alleys, especially, but not exclusively, in its centre; this includes The City, Covent Garden, Holborn, Clerkenwell, Westminster and Bloomsbury amongst others.

An alley in London can also be called a passage, court, place, lane, and less commonly path, arcade, walk, steps, yard, terrace, and close.[53] While both a court and close are usually defined as blind alleys, or cul-de-sacs, several in London are throughways, for example Cavendish Court, a narrow passage leading from Houndsditch into Devonshire Square, and Angel Court, which links King Street and Pall Mall.[54] Bartholomew Close is a narrow winding lane which can be called an alley by virtue of its narrowness, and because through-access requires the use of passages and courts between Little Britain, and Long Lane and Aldersgate Street.[55]

In an old neighbourhood of the City of London, Exchange Alley or Change Alley is a narrow alleyway connecting shops and coffeehouses.[56] It served as a convenient shortcut from the Royal Exchange on Cornhill to the Post Office on Lombard Street and remains as one of a number of alleys linking the two streets. The coffeehouses[57] of Exchange Alley, especially Jonathan's and Garraway's, became an early venue for the lively trading of shares and commodities. These activities were the progenitor of the modern London Stock Exchange.

Boundary Passage, Shoreditch, London, England

Lombard Street and Change Alley had been the open-air meeting place of London's mercantile community before Thomas Gresham founded the Royal Exchange in 1565.[58] In 1698, John Castaing began publishing the prices of stocks and commodities in Jonathan's Coffeehouse, providing the first evidence of systematic exchange of securities in London.

Change Alley was the site of some noteworthy events in England's financial history, including the South Sea Bubble from 1711 to 1720 and the panic of 1745.[59]

In 1761 a club of 150 brokers and jobbers was formed to trade stocks. The club built its own building in nearby Sweeting's Alley in 1773, dubbed the "New Jonathan's", later renamed the Stock Exchange.[60]

West of the City there are a number of alleys just north of Trafalgar Square, including Brydges Place which is situated right next to the Coliseum Theatre and just 15 inches wide at its narrowest point, only one person can walk down it at a time. It is the narrowest alley in London and runs for 200 yards (180 m), connecting St Martin's Lane with Bedfordbury in Covent Garden.[61]

Close by is another very narrow passage, Lazenby Court, which runs from Rose Street to Floral Street down the side of the Lamb and Flag pub; in order to pass people must turn slightly sideways. The Lamb & Flag in Rose Street has a reputation as the oldest pub in the area,[62] though records are not clear. The first mention of a pub on the site is 1772.[63] The Lazenby Court was the scene of an attack on the famous poet and playwright John Dryden in 1679 by thugs hired by John Wilmot, 2nd Earl of Rochester,[64] with whom he had a long-standing conflict.[65]

In the same neighbourhood Cecil Court has an entirely different character than the two previous alleys, and is a spacious pedestrian street with Victorian shop-frontages that links Charing Cross Road with St. Martin's Lane, and it is sometimes used as a location by film companies.[66][67]

One of the older thoroughfares in Covent Garden, Cecil Court dates back to the end of the 17th century. A tradesman's route at its inception, it later acquired the nickname Flicker Alley because of the concentration of early film companies in the Court.[68] The first film-related company arrived in Cecil Court in 1897, a year after the first demonstration of moving pictures in the United Kingdom and a decade before London’s first purpose built cinema opened its doors. Since the 1930s it has been known as the new Booksellers' Row as it is home to nearly twenty antiquarian and second-hand independent bookshops.

It was the temporary home of an eight-year-old Wolfgang Amadeus Mozart while he was touring Europe in 1764. For almost four months the Mozart family lodged with barber John Couzin.[69] According to some modern authorities, Mozart composed his first symphony while a resident of Cecil Court.[70]

North of the centre of London, Camden Passage is a pedestrian passage off Upper Street in the London Borough of Islington, famous because of its many antiques shops, and an antique market on Wednesdays and Saturday mornings. It was built, as an alley, along the backs of houses on Upper Street, then Islington High Street, in 1767.[71]

An alley (usually called a ginnel) in Moss Side, Manchester Tolbooth Wynd, Edinburgh

In Scotland and Northern Ireland the Scots terms close, wynd, pend and vennel are general in most towns and cities. The term close has an unvoiced "s" as in sad. The Scottish author Ian Rankin's novel Fleshmarket Close was retitled Fleshmarket Alley for the American market. Close is the generic Scots term for alleyways, although they may be individually named closes, entries, courts and wynds. A close was private property, hence gated and closed to the public.

A wynd is typically a narrow lane between houses, an open throughway, usually wide enough for a horse and cart. The word derives from Old Norse venda, implying a turning off a main street, without implying that it is curved.[87] In fact, most wynds are straight. In many places wynds link streets at different heights and thus are mostly thought of as being ways up or down hills.

A pend is a passageway that passes through a building, often from a street through to a courtyard, and typically designed for vehicular rather than exclusively pedestrian access.[88] A pend is distinct from a vennel or a close, as it has rooms directly above it, whereas vennels and closes are not covered over.

A vennel is a passageway between the gables of two buildings which can in effect be a minor street in Scotland and the north east of England, particularly in the old centre of Durham. In Scotland, the term originated in royal burghs created in the twelfth century, the word deriving from the Old French word venelle meaning "alley" or "lane". Unlike a tenement entry to private property, known as a "close", a vennel was a public way leading from a typical high street to the open ground beyond the burgage plots.[89] The Latin form is venella.

Traboule, Vieux Lyon, France

The traboules of Lyon are passageways that cut through a house or, in some cases, a whole city block, linking one street with another. They are distinct from most other alleys in that they are mainly enclosed within buildings and may include staircases. While they are found in other French cities including Villefranche-sur-Saône, Mâcon, Chambéry, Saint-Étienne, Louhans, Chalon sur Saône and Vienne (Isère), Lyon has many more; in all there are about 500. The word traboule comes from the Latin trans ambulare, meaning "to cross", and the first of them were possibly built as early as the 4th century. As the Roman Empire disintegrated, the residents of early Lyon—Lugdunum, the capital of Roman Gaul—were forced to move from the Fourvière hill to the banks of the river Saône when their aqueducts began to fail. The traboules grew up alongside their new homes, linking the streets that run parallel to the river Saône and going down to the river itself. For centuries they were used by people to fetch water from the river and then by craftsmen and traders to transport their goods. By the 18th century they were invaluable to what had become the city’s defining industry, textiles, especially silk.[97] Nowadays, traboules are tourist attractions, and many are free and open to the public. Most traboules are on private property, serving as entrances to local apartments.

Venice is largely a traffic free city and there is, in addition to the canals, a maze of around 3000 lanes and alleys called calli (which means narrow). Smaller ones are callètte or callesèlle, while larger ones are calli large. Their width varies from just over 50 centimetres (19.7 in) to 5–6 metres (196.9–236.2 in). The narrowest is Calletta Varisco, which just 53 centimetres (20.9 in); Calle Stretta is 65 centimetres (25.6 in) wide and Calle Ca’ Zusto 68 centimetres (26.8 in). The main ones are also called salizada and wider calli, where trade proliferates, are called riga', while blind calli, used only by residents to reach their homes, are ramo.[98]

Spreuerhofstraße is the world's narrowest street, found in the city of Reutlingen, Baden-Württemberg, Germany.[99] It ranges from 31 centimetres (12.2 in) at its narrowest to 50 centimetres (19.7 in) at its widest.[100] The lane was built in 1727 during the reconstruction efforts after the area was completely destroyed in the massive citywide fire of 1726 and is officially listed in the Land-Registry Office as City Street Number 77.[99][101]

Lintgasse is an alley (German: Gasse) in the Old town of Cologne, Germany between the two squares of Alter Markt and Fischmarkt. It is a pedestrian zone and though only some 130 metres long, is nevertheless famous for its medieval history. The Lintgasse was first mentioned in the 12th century as in Lintgazzin, which may be derived from basketmakers who wove fish baskets out of Linden tree barks. These craftsmen were called Lindslizer, meaning Linden splitter. During the Middle Ages, the area was also known as platēa subri or platēa suberis, meaning street of Quercus suber, the cork oak tree. Lintgasse 8 to 14 used to be homes of medieval knights as still can be seen by signs like Zum Huynen, Zum Ritter or Zum Gir. During the 19th-century the Lintgasse was called Stink-Linkgaß, a because of its poor air quality.[102]

A view of Spreuerhofstraße in Germany, showing the sign indicating that is the world's record narrowest street

Gränd is Swedish for an alley and there are numerous gränder, or alleys in Gamla stan, The Old Town, of Stockholm, Sweden. The town dates back to the 13th century, with medieval alleyways, cobbled streets, and historic buildings. North German architecture has had a strong influence in the Old Town's buildings. Some of Stockholm's alleys are very narrow pedestrian footpaths, while others are very narrow, cobbled streets, or lanes open to slow moving traffic. Mårten Trotzigs gränd ("Alley of Mårten Trotzig") runs from Västerlånggatan and Järntorget up to Prästgatan and Tyska Stallplan, and part of it consists of 36 steps. At its narrowest the alley is a mere 90 cm (35 inches) wide, making it the narrowest street in Stockholm.[103] The alley is named after the merchant and burgher Mårten Trotzig (1559–1617), who, born in Wittenberg,[103] emigrated to Stockholm in 1581, and bought properties in the alley in 1597 and 1599, also opening a shop there. According to sources from the late 16th century, he was dealing in first iron and later copper, by 1595 had sworn his burgher oath, and was later to become one of the richest merchants in Stockholm.[104]

Mårten Trotzigs Gränd, 90 cm wide, the narrowest alley in Gamla stan, Stockholm, Sweden

Possibly referred to as Trångsund ("Narrow strait") before Mårten Trotzig gave his name to the alley, it is mentioned in 1544 as Tronge trappe grenden ("Narrow Alley Stairs"). In 1608 it is referred to Trappegrenden ("The Stairs Alley"), but a map dated 1733 calls it Trotz gränd. Closed off in the mid 19th century, not to be reopened until 1945, its present name was officially sanctioned by the city in 1949.[104]

The "List of streets and squares in Gamla stan" provides links to many pages that describe other alleys in the oldest part of Stockholm; e.g. Kolmätargränd (Coal Meter's Alley); Skeppar Karls Gränd (Skipper Karl's Alley); Skeppar Olofs Gränd (Skipper Olof's Alley); and Helga Lekamens Gränd (Alley of the Holy Body).

A hutong in Beijing

Hutongs (simplified Chinese: 胡同; traditional Chinese: 衚衕; pinyin: hútòng; Wade–Giles: hu-t'ung) are a type of narrow streets or alleys, commonly associated with northern Chinese cities, most prominently Beijing.

In Beijing, hutongs are alleys formed by lines of siheyuan, traditional courtyard residences.[105] Many neighbourhoods were formed by joining one siheyuan to another to form a hutong, and then joining one hutong to another. The word hutong is also used to refer to such neighbourhoods. During China’s dynastic period, emperors planned the city of Beijing and arranged the residential areas according to the social classes of the Zhou Dynasty (1027 – 256 BC). The term "hutong" appeared first during the Yuan Dynasty, and is a term of Mongolian origin meaning "town".[106]

At the turn of the 20th century, the Qing court was disintegrating as China’s dynastic era came to an end. The traditional arrangement of hutongs was also affected. Many new hutongs, built haphazardly and with no apparent plan, began to appear on the outskirts of the old city, while the old ones lost their former neat appearance.

Following the founding of the People’s Republic of China in 1949, many of the old hutongs of Beijing disappeared, replaced by wide boulevards and high rises. Many residents left the lanes where their families lived for generations for apartment buildings with modern amenities. In Xicheng District, for example, nearly 200 hutongs out of the 820 it held in 1949 have disappeared. However, many of Beijing’s ancient hutongs still stand, and a number of them have been designated protected areas. Many hutongs, some several hundred years old, in the vicinity of the Bell Tower and Drum Tower and Shichahai Lake are preserved amongst recreated contemporary two- and three-storey versions.[107][108]

A longtang in Shangxian Fang, a residential compound in Shanghai, China.

Hutongs represent an important cultural element of the city of Beijing and the hutongs are residential neighborhoods which still form the heart of Old Beijing. While most Beijing hutongs are straight, Jiudaowan (九道弯, literally "Nine Turns") Hutong turns nineteen times. At its narrowest section, Qianshi Hutong near Qianmen (Front Gate) is only 40 centimeters (16 inches) wide.[109]

The Shanghai longtang is loosely equivalent to the hutong of Beijing. A longtang (弄堂 lòngtáng, Shanghainese: longdang) is a laneway in Shanghai and, by extension, a community centred on a laneway or several interconnected laneways. On its own long (traditional Chinese 衖 or 弄, simplified Chinese 弄) is a Chinese term for "alley" or "lane", which is often left untranslated in Chinese addresses, but may also be translated as "lane", and "tang" is a parlor or hallway.[110] It is sometimes called lilong (里弄); the latter name incorporates the -li suffix often used in the name of residential developments in the late 19th and early 20th centuries. As with the term hutong, the Shanghai longdang can either refers to the lanes that the houses face onto, or a group of houses connected by the lane.[111][112][113][114]

A Golden Gai alley, Tokyo, Japan.

Shinjuku Golden Gai (新宿ゴールデン街) is a small area of Shinjuku, Tokyo, Japan,[115] famous both as an area of architectural interest and for its nightlife. It is composed of a network of six narrow alleys, connected by even narrower passageways which are just about wide enough for a single person to pass through. Over 200 tiny shanty-style bars, clubs and eateries are squeezed into this area.[116]

Its architectural importance is that it provides a view into the relatively recent past of Tokyo, when large parts of the city resembled present-day Golden Gai, particularly in terms of the extremely narrow lanes and the tiny two-storey buildings. Nowadays, most of the surrounding area has been redeveloped. Typically, the buildings are just a few feet wide and are built so close to the ones next door that they nearly touch. Most are two-storey, having a small bar at street level and either another bar or a tiny flat upstairs, reached by a steep set of stairs. None of the bars are very large; some are so small that they can only fit five or so customers at one time.[115] The buildings are generally ramshackle, and the alleys are dimly lit, giving the area a very scruffy and run-down appearance. However, Golden Gai is not a cheap place to drink, and the clientele that it attracts is generally well off.

Golden Gai is well known as a meeting place for musicians, artists, directors, writers, academics and actors, including many celebrities. Many of the bars only welcome regular customers, who initially should be introduced by an existing patron, although many others welcome non-regulars, some even making efforts to attract overseas tourists by displaying signs and price lists in English.[115]

Golden Gai was known for prostitution before 1958, when prostitution became illegal. Since then it has developed as a drinking area, and at least some of the bars can trace their origins back to the 1960s.[116]

A medina quarter (Arabic: المدينة القديمةal-madīnah al-qadīmah "the old city") is a distinct city section found in many North African cities. The medina is typically walled, contains many narrow and maze-like streets.[117] The word "medina" (Arabic: مدينةmadīnah) itself simply means "city" or "town" in modern Arabic.

Because of the very narrow streets, medinas are generally free from car traffic, and in some cases even motorcycle and bicycle traffic. The streets can be less than a metre wide. This makes them unique among highly populated urban centres. The Medina of Fes, Morocco or Fes el Bali, is considered one of the largest car-free urban areas in the world.[118]

Notes

Bibliography


Road surface

Asphalt Surfacing Contractors Price A single brick A wall constructed in glazed-headed Flemish bond with bricks of various shades and lengths Raw (green) Indian brick An old brick wall in English bond laid with alternating courses of headers and stretchers Bricked Front Street along the Cane River in historic Natchitoches, Louisiana

A brick is building material used to make walls, pavements and other elements in masonry construction. Traditionally, the term brick referred to a unit composed of clay, but it is now used to denote any rectangular units laid in mortar. A brick can be composed of clay-bearing soil, sand, and lime, or concrete materials. Bricks are produced in numerous classes, types, materials, and sizes which vary with region and time period, and are produced in bulk quantities. Two basic categories of bricks are fired and non-fired bricks.

Block is a similar term referring to a rectangular building unit composed of similar materials, but is usually larger than a brick. Lightweight bricks (also called lightweight blocks) are made from expanded clay aggregate.

Fired bricks are one of the longest-lasting and strongest building materials, sometimes referred to as artificial stone, and have been used since circa 5000 BC. Air-dried bricks, also known as mudbricks, have a history older than fired bricks, and have an additional ingredient of a mechanical binder such as straw.

Bricks are laid in courses and numerous patterns known as bonds, collectively known as brickwork, and may be laid in various kinds of mortar to hold the bricks together to make a durable structure.

House construction using bricks in Kerala, India The Roman Basilica Aula Palatina in Trier, Germany, built with fired bricks in the 4th century as an audience hall for Constantine I

The earliest bricks were dried brick, meaning that they were formed from clay-bearing earth or mud and dried (usually in the sun) until they were strong enough for use. The oldest discovered bricks, originally made from shaped mud and dating before 7500 BC, were found at Tell Aswad, in the upper Tigris region and in southeast Anatolia close to Diyarbakir.[1] Other more recent findings, dated between 7,000 and 6,395 BC, come from Jericho, Catal Hüyük, the ancient Egyptian fortress of Buhen, and the ancient Indus Valley cities of Mohenjo-daro, Harappa,[2] and Mehrgarh.[3] Ceramic, or fired brick was used as early as 3000 BC in early Indus Valley cities.[4]

The ancient Jetavanaramaya stupa in Anuradhapura, Sri Lanka is one of the largest brick structures in the world. The world's highest brick tower of St. Martin's Church in Landshut, Germany, completed in 1500 Malbork Castle, former Ordensburg of the Teutonic Order – biggest brick castle in the world

In pre-modern China, bricks were being used from the 2nd millennium BC at a site near Xi'an.[5] Bricks were produced on a larger scale under the Western Zhou dynasty about 3,000 years ago, and evidence for some of the first fired bricks ever produced has been discovered in ruins dating back to the Zhou.[6][7][8] The carpenter's manual Yingzao Fashi, published in 1103 at the time of the Song dynasty described the brick making process and glazing techniques then in use. Using the 17th century encyclopaedic text Tiangong Kaiwu, historian Timothy Brook outlined the brick production process of Ming Dynasty China:

"...the kilnmaster had to make sure that the temperature inside the kiln stayed at a level that caused the clay to shimmer with the colour of molten gold or silver. He also had to know when to quench the kiln with water so as to produce the surface glaze. To anonymous labourers fell the less skilled stages of brick production: mixing clay and water, driving oxen over the mixture to trample it into a thick paste, scooping the paste into standardised wooden frames (to produce a brick roughly 42 cm long, 20 cm wide, and 10 cm thick), smoothing the surfaces with a wire-strung bow, removing them from the frames, printing the fronts and backs with stamps that indicated where the bricks came from and who made them, loading the kilns with fuel (likelier wood than coal), stacking the bricks in the kiln, removing them to cool while the kilns were still hot, and bundling them into pallets for transportation. It was hot, filthy work." The brickwork of Shebeli Tower in Iran displays 12th-century craftsmanship Main article: Roman brick

Early civilisations around the Mediterranean adopted the use of fired bricks, including the Ancient Greeks and Romans. The Roman legions operated mobile kilns,[9] and built large brick structures throughout the Roman Empire, stamping the bricks with the seal of the legion.

During the Early Middle Ages the use of bricks in construction became popular in Northern Europe, after being introduced there from Northern-Western Italy. An independent style of brick architecture, known as brick Gothic (similar to Gothic architecture) flourished in places that lacked indigenous sources of rocks. Examples of this architectural style can be found in modern-day Denmark, Germany, Poland, and Russia.

This style evolved into Brick Renaissance as the stylistic changes associated with the Italian Renaissance spread to northern Europe, leading to the adoption of Renaissance elements into brick building. A clear distinction between the two styles only developed at the transition to Baroque architecture. In Lübeck, for example, Brick Renaissance is clearly recognisable in buildings equipped with terracotta reliefs by the artist Statius von Düren, who was also active at Schwerin (Schwerin Castle) and Wismar (Fürstenhof).

Chile house in Hamburg, Germany

Long-distance bulk transport of bricks and other construction equipment remained prohibitively expensive until the development of modern transportation infrastructure, with the construction of canal, roads, and railways.

Production of bricks increased massively with the onset of the Industrial Revolution and the rise in factory building in England. For reasons of speed and economy, bricks were increasingly preferred as building material to stone, even in areas where the stone was readily available. It was at this time in London that bright red brick was chosen for construction to make the buildings more visible in the heavy fog and to help prevent traffic accidents.[10]

The transition from the traditional method of production known as hand-moulding to a mechanised form of mass-production slowly took place during the first half of the nineteenth century. Possibly the first successful brick-making machine was patented by Henry Clayton, employed at the Atlas Works in Middlesex, England, in 1855, and was capable of producing up to 25,000 bricks daily with minimal supervision.[11] His mechanical apparatus soon achieved widespread attention after it was adopted for use by the South Eastern Railway Company for brick-making at their factory near Folkestone.[12] The Bradley & Craven Ltd ‘Stiff-Plastic Brickmaking Machine’ was patented in 1853, apparently predating Clayton. Bradley & Craven went on to be a dominant manufacturer of brickmaking machinery.[13] Predating both Clayton and Bradley & Craven Ltd. however was the brick making machine patented by Richard A. Ver Valen of Haverstraw, New York in 1852.[14]

The demand for high office building construction at the turn of the 20th century led to a much greater use of cast and wrought iron, and later, steel and concrete. The use of brick for skyscraper construction severely limited the size of the building – the Monadnock Building, built in 1896 in Chicago, required exceptionally thick walls to maintain the structural integrity of its 17 storeys.

Following pioneering work in the 1950s at the Swiss Federal Institute of Technology and the Building Research Establishment in Watford, UK, the use of improved masonry for the construction of tall structures up to 18 storeys high was made viable. However, the use of brick has largely remained restricted to small to medium-sized buildings, as steel and concrete remain superior materials for high-rise construction.[15]

This wall in Beacon Hill, Boston shows different types of brickwork and stone foundations

There are thousands of types of bricks that are named for their use, size, forming method, origin, quality, texture, and/or materials.

Categorized by manufacture method:

Categorized by use:

Specialized use bricks:

Bricks named for place of origin:

Brick making at the beginning of the 20th century.

Three basic types of brick are un-fired, fired, and chemically set bricks. Each type is manufactured differently.

Main article: Mudbrick

Unfired bricks, also known as mudbricks, are made from a wet, clay-containing soil mixed with straw or similar binders. They are air-dried until ready for use.

Raw bricks sun-drying before being fired

Fired bricks are burned in a kiln which makes them durable. Modern, fired, clay bricks are formed in one of three processes – soft mud, dry press, or extruded. Depending on the country, either the extruded or soft mud method is the most common, since they are the most economical.

Normally, bricks contain the following ingredients:[16]

  1. Silica (sand) – 50% to 60% by weight
  2. Alumina (clay) – 20% to 30% by weight
  3. Lime – 2 to 5% by weight
  4. Iron oxide – ≤ 7% by weight
  5. Magnesia – less than 1% by weight

Three main methods are used for shaping the raw materials into bricks to be fired:

Xhosa brickmaker at kiln near Ngcobo in 2007

In many modern brickworks, bricks are usually fired in a continuously fired tunnel kiln, in which the bricks are fired as they move slowly through the kiln on conveyors, rails, or kiln cars, which achieves a more consistent brick product. The bricks often have lime, ash, and organic matter added, which accelerates the burning process.

A brickmaker in India – Tashrih al-aqvam (1825)

The other major kiln type is the Bull's Trench Kiln (BTK), based on a design developed by British engineer W. Bull in the late 19th century.

An oval or circular trench is dug, 6–9 metres wide, 2-2.5 metres deep, and 100–150 metres in circumference. A tall exhaust chimney is constructed in the centre. Half or more of the trench is filled with "green" (unfired) bricks which are stacked in an open lattice pattern to allow airflow. The lattice is capped with a roofing layer of finished brick.

In operation, new green bricks, along with roofing bricks, are stacked at one end of the brick pile; cooled finished bricks are removed from the other end for transport to their destinations. In the middle, the brick workers create a firing zone by dropping fuel (coal, wood, oil, debris, and so on) through access holes in the roof above the trench.

The advantage of the BTK design is a much greater energy efficiency compared with clamp or scove kilns. Sheet metal or boards are used to route the airflow through the brick lattice so that fresh air flows first through the recently burned bricks, heating the air, then through the active burning zone. The air continues through the green brick zone (pre-heating and drying the bricks), and finally out the chimney, where the rising gases create suction that pulls air through the system. The reuse of heated air yields savings in fuel cost.

As with the rail process, the BTK process is continuous. A half-dozen labourers working around the clock can fire approximately 15,000–25,000 bricks a day. Unlike the rail process, in the BTK process the bricks do not move. Instead, the locations at which the bricks are loaded, fired, and unloaded gradually rotate through the trench.[17]

Yellow London Stocks at Waterloo station

The fired colour of tired clay bricks is influenced by the chemical and mineral content of the raw materials, the firing temperature, and the atmosphere in the kiln. For example, pink bricks are the result of a high iron content, white or yellow bricks have a higher lime content. Most bricks burn to various red hues; as the temperature is increased the colour moves through dark red, purple, and then to brown or grey at around 1,300 °C (2,372 °F). The names of bricks may reflect their origin and colour, such as London stock brick and Cambridgeshire White. Brick tinting may be performed to change the colour of bricks to blend-in areas of brickwork with the surrounding masonry.

An impervious and ornamental surface may be laid on brick either by salt glazing, in which salt is added during the burning process, or by the use of a slip, which is a glaze material into which the bricks are dipped. Subsequent reheating in the kiln fuses the slip into a glazed surface integral with the brick base.

Chemically set bricks are not fired but may have the curing process accelerated by the application of heat and pressure in an autoclave.

Swedish Mexitegel is a sand-lime or lime-cement brick.

Calcium-silicate bricks are also called sandlime or flintlime bricks, depending on their ingredients. Rather than being made with clay they are made with lime binding the silicate material. The raw materials for calcium-silicate bricks include lime mixed in a proportion of about 1 to 10 with sand, quartz, crushed flint, or crushed siliceous rock together with mineral colourants. The materials are mixed and left until the lime is completely hydrated; the mixture is then pressed into moulds and cured in an autoclave for three to fourteen hours to speed the chemical hardening.[18] The finished bricks are very accurate and uniform, although the sharp arrises need careful handling to avoid damage to brick and bricklayer. The bricks can be made in a variety of colours; white, black, buff, and grey-blues are common, and pastel shades can be achieved. This type of brick is common in Sweden, especially in houses built or renovated in the 1970s. In India these are known as fly ash bricks, manufactured using the FaL-G (fly ash, lime, and gypsum) process. Calcium-silicate bricks are also manufactured in Canada and the United States, and meet the criteria set forth in ASTM C73 – 10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick).

Main article: Concrete masonry unit A concrete brick-making assembly line in Guilinyang Town, Hainan, China. This operation produces a pallet containing 42 bricks, approximately every 30 seconds.

Bricks formed from concrete are usually termed as blocks, and are typically pale grey. They are made from a dry, small aggregate concrete which is formed in steel moulds by vibration and compaction in either an "egglayer" or static machine. The finished blocks are cured, rather than fired, using low-pressure steam. Concrete blocks are manufactured in a much wider range of shapes and sizes than clay bricks and are also available with a wider range of face treatments – a number of which simulate the appearance of clay bricks.

Concrete bricks are available in many colours and as an engineering brick made with sulfate-resisting Portland cement or equivalent. When made with adequate amount of cement they are suitable for harsh environments such as wet conditions and retaining walls. They are made to standards BS 6073, EN 771-3 or ASTM C55. Concrete bricks contract or shrink so they need movement joints every 5 to 6 metres, but are similar to other bricks of similar density in thermal and sound resistance and fire resistance.[18]

Main article: Compressed earth block

Compressed earth blocks are made mostly from slightly moistened local soils compressed with a mechanical hydraulic press or manual lever press. A small amount of a cement binder may be added, resulting in a stabilised compressed earth block.

Comparison of typical brick sizes of assorted countries with isometric projections with dimensions in mm Loose bricks

For efficient handling and laying, bricks must be small enough and light enough to be picked up by the bricklayer using one hand (leaving the other hand free for the trowel). Bricks are usually laid flat, and as a result, the effective limit on the width of a brick is set by the distance which can conveniently be spanned between the thumb and fingers of one hand, normally about four inches (about 100 mm). In most cases, the length of a brick is about twice its width, about eight inches (about 200 mm) or slightly more. This allows bricks to be laid bonded in a structure which increases stability and strength (for an example, see the illustration of bricks laid in English bond, at the head of this article). The wall is built using alternating courses of stretchers, bricks laid longways, and headers, bricks laid crossways. The headers tie the wall together over its width. In fact, this wall is built in a variation of English bond called English cross bond where the successive layers of stretchers are displaced horizontally from each other by half a brick length. In true English bond, the perpendicular lines of the stretcher courses are in line with each other.

A bigger brick makes for a thicker (and thus more insulating) wall. Historically, this meant that bigger bricks were necessary in colder climates (see for instance the slightly larger size of the Russian brick in table below), while a smaller brick was adequate, and more economical, in warmer regions. A notable illustration of this correlation is the Green Gate in Gdansk; built in 1571 of imported Dutch brick, too small for the colder climate of Gdansk, it was notorious for being a chilly and drafty residence. Nowadays this is no longer an issue, as modern walls typically incorporate specialised insulation materials.

The correct brick for a job can be selected from a choice of colour, surface texture, density, weight, absorption, and pore structure, thermal characteristics, thermal and moisture movement, and fire resistance.

In England, the length and width of the common brick has remained fairly constant over the centuries (but see brick tax), but the depth has varied from about two inches (about 51 mm) or smaller in earlier times to about two and a half inches (about 64 mm) more recently. In the United Kingdom, the usual size of a modern brick is 215 × 102.5 × 65 mm (about ​8 5⁄8 × ​4 1⁄8 × ​2 5⁄8 inches), which, with a nominal 10 mm (​3⁄8 inch) mortar joint, forms a unit size of 225 × 112.5 × 75 mm (9 × ​4 1⁄2 × 3 inches), for a ratio of 6:3:2.

In the United States, modern standard bricks are specified for various uses;[19] most are sized at about 8 × ​3 5⁄8  × ​2 1⁄4 inches (203 × 92 × 57 mm). The more commonly used is the modular brick ​7 5⁄8  × ​3 5⁄8  × ​2 1⁄4 inches (194 × 92 × 57 mm). This modular brick of ​7 5⁄8 with a ​3⁄8 mortar joint eases the calculation of the number of bricks in a given wall.[20]

Some brickmakers create innovative sizes and shapes for bricks used for plastering (and therefore not visible on the inside of the building) where their inherent mechanical properties are more important than their visual ones.[21] These bricks are usually slightly larger, but not as large as blocks and offer the following advantages:

Blocks have a much greater range of sizes. Standard co-ordinating sizes in length and height (in mm) include 400×200, 450×150, 450×200, 450×225, 450×300, 600×150, 600×200, and 600×225; depths (work size, mm) include 60, 75, 90, 100, 115, 140, 150, 190, 200, 225, and 250. They are usable across this range as they are lighter than clay bricks. The density of solid clay bricks is around 2000 kg/m³: this is reduced by frogging, hollow bricks, and so on, but aerated autoclaved concrete, even as a solid brick, can have densities in the range of 450–850 kg/m³.

Bricks may also be classified as solid (less than 25% perforations by volume, although the brick may be "frogged," having indentations on one of the longer faces), perforated (containing a pattern of small holes through the brick, removing no more than 25% of the volume), cellular (containing a pattern of holes removing more than 20% of the volume, but closed on one face), or hollow (containing a pattern of large holes removing more than 25% of the brick's volume). Blocks may be solid, cellular or hollow

The term "frog" can refer to the indentation or the implement used to make it. Modern brickmakers usually use plastic frogs but in the past they were made of wood.

Brick arch from a vault in Roman Bath – England A brick section of the old Dixie Highway, United States

The compressive strength of bricks produced in the United States ranges from about 1000 lbf/in² to 15,000 lbf/in² (7 to 105 MPa or N/mm² ), varying according to the use to which the brick are to be put. In England clay bricks can have strengths of up to 100 MPa, although a common house brick is likely to show a range of 20–40 MPa.

In the United States, bricks have been used for both buildings and pavements. Examples of brick use in buildings can be seen in colonial era buildings and other notable structures around the country. Bricks have been used in pavements especially during the late 19th century and early 20th century. The introduction of asphalt and concrete reduced the use of brick pavements, but it is used as a method of traffic calming or as a decorative surface in pedestrian precincts. For example, in the early 1900s, most of the streets in the city of Grand Rapids, Michigan, were paved with bricks. Today, there are only about 20 blocks of brick-paved streets remaining (totalling less than 0.5 percent of all the streets in the city limits).[22] Much like in Grand Rapids, municipalities across the United States began replacing brick streets with inexpensive asphalt concrete by the mid-20th century.[23]

Bricks in the metallurgy and glass industries are often used for lining furnaces, in particular refractory bricks such as silica, magnesia, chamotte and neutral (chromomagnesite) refractory bricks. This type of brick must have good thermal shock resistance, refractoriness under load, high melting point, and satisfactory porosity. There is a large refractory brick industry, especially in the United Kingdom, Japan, the United States, Belgium and the Netherlands.

In Northwest Europe, bricks have been used in construction for centuries. Until recently, almost all houses were built almost entirely from bricks. Although many houses are now built using a mixture of concrete blocks and other materials, many houses are skinned with a layer of bricks on the outside for aesthetic appeal.

Engineering bricks are used where strength, low water porosity or acid (flue gas) resistance are needed.

In the UK a red brick university is one founded in the late 19th or early 20th century. The term is used to refer to such institutions collectively to distinguish them from the older Oxbridge institutions, and refers to the use of bricks, as opposed to stone, in their buildings.

Colombian architect Rogelio Salmona was noted for his extensive use of red bricks in his buildings and for using natural shapes like spirals, radial geometry and curves in his designs.[24] Most buildings in Colombia are made of brick, given the abundance of clay in equatorial countries like this one.

Starting in the 20th century, the use of brickwork declined in some areas due to concerns with earthquakes. Earthquakes such as the San Francisco earthquake of 1906 and the 1933 Long Beach earthquake revealed the weaknesses of unreinforced brick masonry in earthquake-prone areas. During seismic events, the mortar cracks and crumbles, and the bricks are no longer held together. Brick masonry with steel reinforcement, which helps hold the masonry together during earthquakes, was used to replace many of the unreinforced masonry buildings. Retrofitting older unreinforced masonry structures has been mandated in many jurisdictions.

A panorama after the 1906 San Francisco earthquake. The Paving Company Near Me

https://www.helpwikileaks.co.za/alberton/

Help Wiki Leaks Have Driveway Sealcoating List